Medidor De Flujo Masico De Liquido GLP

• Customization: Available
• Nominal Diameter: 80mm (3*1/5)
• Zero Stability: 0.115kg/Min
• Model NO.: CG-80
• Material of Tube: Stainless Steel 316L
• Ex-Proof Grade: Ex[Ib]Iibt4GB
• Max. Flowrate: 3000kg/Min
• Mass Accuracy Grade: 0.2
• Max. Operating Pressure: 4MPa
• Temperature Accuracy: ±1°c
• Operating Voltage: AC220V/50Hz, DC24/50Hz
• Operating Temperature: -50~200°c
• Transport Package: Carton/Wooden Case
• Trademark: Sealand
• Origin: Zhejiang, China
• Production Capacity: 300 Sets Per Month

Product Description

 

Introduction

 

Introduction of Medidor de flujo masico

Mass flow meter consist of mass flow sensor and mass flow transmitter. It does not measure the volume per unit time (e.g., cubic meters per second) passing through the device, but measures the mass per unit time (e.g., kilograms per second) flowing through the device. The result of volumetric meter varies with temperature, pressure, composition, etc., but mass flow meter does not have such problem.

 

Operating principle of Medidor de flujo masico

Mass flow meter is designed according to Coriolis Effect. The inlet arm and the outlet arm vibrate with the same frequency as the overall vibration, but when there is mass flow the two vibrations are out of sync: the inlet arm is behind, the outlet arm is ahead. The two vibrations are shifted in phase with respect to each other, and the degree of phase-shift is a measure for the amount of mass that is flowing through the tubes.

 

Feartures:

*Reduced fill time with higher flow rate capacity

*Compact design with no moving parts, no special mounting and no flow conditioning required

*Fast delivery and global support

 

Pictures of Medidor de flujo masico

 

Specifications

 

Specifications of mass flow sensor

Specifications of mass flow sensor
Gas accuracy	±0.5%
Liquid accuracy	±0.2%
Temp. accuracy	±1°C
Loss of pressure	≤0.2MPa
MWP	4MPa
Temp. rating	-50°C~+200°C
Connector	DN80 flange, customizable
Ex-proof grade	Ex[ib]IIBT1~T6 Gb / Ex[ib]IICT1~T6 Gb

 

Specifications of mass flow transmitter

Specifications of mass flow transmitter
Temp. rating	-20°C~+50°C
RH	≤95%, not condensed
Atmospheric Pressure	86~106 kPa
Operating voltage	AC220V/50Hz, DC24/50Hz
Communication port	RS485 Modbus RTU
Ex-proof grade	Exd[ib]IIBT4Gb

 

Specifications of Medidor de flujo masico

 

Specifications of mass flow meter
Model No.	CNG-080
Mass accuracy grade	0.2
Temperature accuracy	±1°C
Zero stability	0.115kg/min
Repeatability	0.25%
Max. flowrate	3000kg/min
Nominal diameter	80mm( 3*1/5 inch)
Fluid temperature	-200~200°C
Material of tube	Stainless steel 316L
Packing	1set/carton or wooden case
Warranty	2 years
Package size	1340*1300*1000mm
G.W.	127.8kgs

 

Advantages of Medidor de flujo masico

 

1. High reliability

 

2. It requires low maintenance, because of no movable parts.

 

3. High accuracy: Generally, it is from 0.15%-0.3%.

 

4. It is not affected by the fluid, saving the design & installation cost.

 

5. It shows many parameter simultaneously, such as mass flow, temperature, density, etc.

 

6. Convenient installation: Generally, there is no specific requirement of choosing upstream or downstream pipe.

 

7. Wide application: Besides the common fluid, the mass flowmeter can measure other industrial media, such

     as non-Newtonian fluid, all kinds of slurry, suspensions, etc.

 

 

Installation of Medidor de flujo masico  

It is highly recommended to install as follows, for different fluid.

 

Production Process

 

Production process of Medidor de flujo masico

1. Bend vibrating tubes with bending machine

 

2. Smear the solder on the production line

 

3. Solder the tubes in the Vacuum brazing furnace

 

4. Wire the mass flowmeter (at the same production line of step 2)

 

5. Test for the 1 ^st  time

 

6. Burn-in: Mass flowmeter will be excercised for 15 days prior to being placed in service.

 

7. Test for the 2 ^nd  time (at the same production line of step 5)

 

8.  Cover the tubes with housing & polish the surface (at the same production line of step 2)

 

9.  Test for the  3 ^rd  time(final test; this test equipment is approved by China government, and is the

    TEST STANDARD of mass flowmeter in China)

 

10. Pack in carton/wooden case

Item list per package
Item	Quantity/pc
Mass flow sensor	1
Mass flow transmitter	1
Transmitter cable	1
Instruction manual	1

 

 

 

Related Products

 

Related products: Medidor de flujo masico  CG-006, CG-015, CG-025, CG-050, read more!

 

Bulk order of Medidor de flujo masico

 

 

Certificate of Medidor de flujo masico

 

 

 

About Sealand

 

Sealand profile  

We are professional manufacturer of CNG mass flowmeter, mass flow meter, Coriolis mass flowmeter,

Coriolis mass flow meter, Coriolis  flowmeter, Coriolis flow meter. Read more!

 

 

Why Sealand?

 

1. Sealand is professional, with senior engineers from the first research team in this field in China, and

    junior one from college, to keep improving.

 

2. Sealand is experienced. It started to research and develop in 1990. All employees are stable here;

    even the production-line workers have worked here for more than 5 years.

 

3. Sealand mass flowmeter can be used in many fields, with a flowrate from 0 to 5000kg/min, and the

    connection ends are customizable.

 

4. Sealand strictly controls the quality from raw material to finished products, and all products will be

    inspected and tested for 3 times before shipment.

 

5. Sealand cooperates with efficient logistics, to help cut down the shipping cost and time.

 

6. The warranty is 2 years, but technical support is always available. Read more!

 

 

FAQ.

 

1.Customer: May I put my own logo on the product?

   Sealand: Sure. Logo can be printed on the housing, and company name can be engraved on the nameplate.

 

2.Customer: How about the quality control?
   Sealand: All products will be tested for 3 times before packed.

3.Customer: May I release trial order, 1 pc for example?
   Sealand: Certainly, trial order is acceptable. In general, we have common models in stock. Sample will be sent

   within 1 week, after payment is received.

4.Customer: Could you design according to my requirements?
   Sealand: Of course, our team will design for you, to make our mass flowmeter work perfectly at your end.